Contrary to popular belief, mass reduction does not automatically equal fuel savings, especially when it comes to urban driving. There are other factors that determine the fuel efficiency of a vehicle such as driving cycle, vehicle size and its powertrain. Until recently, there was a  lack of variety in engine types and powertrains, so even though automakers reduced the weight of car frames, they could not apply a complementary engine or powertrain to the lighter parts.

So, have automakers been lightweighting for nothing?

Of course not, in the past decade alone, engines and powertrains have also become extremely efficient through advancements in start-stop-systems and downsizing, and newer options including hybrids, electric batteries and range extenders that now allow automakers to capitalize on their lightweight materials.

Although there are several lightweight materials, below are 5 reasons why AHSS continues to be the lightweight material of choice for automakers:

1. Decision Makers Care About the Environment

Well, not everyone, but many countries around the world have started the process to phase out gasoline and diesel-fueled cars, including India and China, the two largest automotive markets in the world. Governments are taking serious action against climate change and it will reflect in their policies. Automakers are choosing to lightweight their vehicles for lower emission rates with AHSS, because not only is AHSS lightweight, there are no trade-offs with other vital features such as safety and cost-effectiveness.

2. Everyone’s Going Electric

Globally, automakers are investing in electric vehicles (EVs) in line with national and international environmental policies. However, EVs still have a ways to go before they become the norm. EVs will face the same safety requirements as regular cars, but with the added responsibility of protecting the battery and its flammable components during a crash.

In 2016 there were several car accidents involving the Tesla Model S, where leaked battery fluids caused fires. Automakers need to find a solution to make EVs as safe, and eventually, safer than traditional cars. As an innovative automotive material, AHSS was built for safety.

3. Safety is Always First

Safety is and should always be the number one priority for automakers, material providers and policymakers alike. Even with all the hype about autonomous driving and sensors, there is very little chance that policymakers will reverse the stringent safety regulations in place today. People want to feel safe, no matter what type of car they are getting into.  

2016 Smart Fortwo and the Mercedes S Class take part in a crash test (Source: Green Car Reports)

One possible material solution is Complex Phase (CP) steel, a type of POSCO GIGA STEEL for the vehicle’s side panels, bumper rails and door impact bars- the parts that determine the safety ratings of the vehicle. It has superior strength and shock-absorbing qualities, without the added weight of traditional high-strength materials, and that’s why carmakers such as GM Korea, Ssangyong Motors and Renault Samsung Motors all use POSCO GIGA STEEL.

4. Cost is Always Second

This goes for automakers as well as drivers on the consuming end. Drivers want lower costs without compromising safety and performance ratings, and desire fuel efficiency- a major reason why automakers are lightweighting.

Some automakers choose alternative materials such as aluminum and carbon fiber to meet lightweight requirements to find that not only are the materials more costly over steel, factories need an equipment overhaul to work with them. Moreover, there are additional costs related to training employees to work with new materials, whereas all auto manufacturers are familiar with welding and forming steel.  

Take a look at this infographic and see how AHSS stacks up against other lightweight materials in terms of cost and performance.  

5. It’s Not Over Till It’s Over

No two lightweight materials are the same when observed under the life-cycle approach, a comprehensive life cycle assessment of a material’s automotive carbon emissions from production to disposal. Often times, the process of manufacturing lightweight materials and improved powertrains result in more carbon emissions than they are saving.

The life cycle assessment can be used to determine the carbon output of a vehicle. (Source: World Auto Steel)

At the end of the day, steel has the lowest production-related emissions and can be recycled at the end of its lifecycle. Steel remains the most recycled material because it can be reapplied in different forms almost infinitely.

Automakers are increasingly incorporating lightweight materials to their new models. Although competition for the greatest market share of lightweight materials is fierce, AHSS is by far the leading material when it comes to lightweight solutions. According to McKinsey & Company’s Lightweight, Heavy Impact report, the percentage of high-strength materials used for cars will increase to 38 percent by 2030, compared to 15 percent in 2010. Steel continues to evolve according to the changing demands of the auto market, and for now, there is no other multi-solution material that can compete.

Cover photo courtesy of Hyundai.

Don’t miss any of the exciting stories from The Steel Wire – subscribe via email today.

Why Should People Care About Autonomous Transportation?

Autonomous transportation is emerging across the world, from personal vehicles to Tesla’s proposed semi trucks that drive in convoy with a lead vehicle handling autonomous follow trucks. Intel is also planning to test a fleet of one hundred autonomous cars and Hyundai’s planning to showcase its self-driving technology at the biggest winter sports event of 2018.

While many have heard of self-driving cars and other road-based vehicles, it may come as a surprise to learn just how far technology has advanced in autonomous transportation. The Swiss bank UBS, suggests that autonomous airplanes could be in place by 2025, a feat that would save airlines $35 billion a year. Clearly, the benefits are drastic and it is becoming essential for companies to invest in making autonomous travel work.

Even further into the future, companies like Next Future Transportation are envisioning pod travel, through which individual vehicles will autonomously transport people from point A to point B.

Next Future Transportation’s autonomous pod (Source: Next Future Transportation)

No matter the type, the economic impact of autonomous transportation technology is unavoidable. Boston Consulting Group expects that the driverless car market will be worth $42 billion by 2025 and $77 billion by 2035, and IHS suggests driverless car ubiquity will hit around 2050.

In terms of what these automated vehicles offer to the public, the Eno Centre for Transportation reports that if 90 percent of American roads were autonomous, accidents would drop from 6 million a year to 1.3 million; deaths would fall from 33,000 to 11,300. Add in better traffic conditions, higher fuel efficiency and extra time gained from not driving, and it’s easy to see why companies are taking notice of this tech sector.

Who is Investing in Autonomous Transportation?
Autonomous transportation entails investment from various industries from materials to technology, and major players are making early moves. Tesla is a good example of a specialty vehicle company determined to see autonomous transportation become a worldwide reality.

Big names in traditional transportation are also jumping aboard. General Motors purchased Cruise Automation, and Ford has invested in an AI startup, Argo AI. Audi has created a subsidiary, the SDS Company, focused on self-driving technology, and BMW has formed an alliance with Intel and Mobileye.

There are also auto suppliers getting into this market, such as Magna, a supplier that is manufacturing vehicles as well as providing the parts to help more traditional companies jump into automated vehicles.

Tech giants like Microsoft are getting involved, too, collaborating with automakers to include their own technology in self-driving vehicles, as well as to research and develop automated transportation technology.

Whether companies are involved in creating the actual vehicles that will be automated, providing security and safety features, pursuing further research, or providing the materials needed to create these vehicles of the future, it is safe to say that this industry is growing rapidly.

Autonomous Transportation and the Steel Industry
A shift toward autonomous transportation is good news for the steel industry. At first glance, it seems steel consumption will decrease as fewer car accidents will lead to less demand for repair parts and more room to use other materials for aesthetic purposes. However, demand for high-strength, premium steels that are highly sought after in traditional cars will continue to increase.

Materials like POSCO GIGA STEEL provide greater strength and safety for automated vehicles, an important consideration when one considers a road full of cars driving themselves. While people may no longer be behind the wheel, they will want to know that their cars, and the cars around them, are made to the highest safety standards. Safety regulations for traditional cars are only getting tougher, and that won’t change with autonomous vehicles.

POSCO’s PBC-EV made with POSCO GIGA STEEL

High-strength steel allows car makers to lightweight their vehicles without compromising safety. POSCO GIGA STEEL’s lightweight properties make it a sustainable solution for automated vehicles that aim to leave a minimal carbon footprint and maximize fuel efficiency. Even better, it is affordable; an important factor considering the overall cost of the technology and hardware that goes into automated vehicles.

The steel industry will also see a boost in the need for accompanying facilities for automated transportation, including manufacturing plants, parking structures, charging stations, smart roads and so on. While automated transportation may be high tech, there will be plenty of opportunities for those in the steel industry to provide material solutions to a rapidly growing market.

Cover photo courtesy of Auto Evolution.

POSCO’s innovations in steel technology have long supplied material solutions for the automotive industry. Last year, POSCO sold approximately 9 million tons of automotive steel sheets, accounting for 10% of the global automotive steel sheet market. In 2017, POSCO’s focus on providing customers with the most advanced, high-quality steel continues with POSCO GIGA STEEL.

POSCO GIGA STEEL, the Beginning of a New Era

POSCO GIGA STEEL represents the apex of steel technology as it is lightweight, strong, and highly formable – exactly what automakers are looking for. Innovations in POSCO’s manufacturing processes reduce both its production emissions and price, making it a more sustainable and affordable option for car makers compared to other lightweight materials. See how POSCO GIGA STEEL is opening a new era for automotive steel in the video below.

POSCO GIGA STEEL Provides Strength & Safety

Automotive steel is categorized according to its tensile strength. POSCO GIGA STEELS fall into the highest category, which includes steels with a tensile strength rated at more than 1 GPa (Gigapascal), meaning it can withstand more than 100 kilograms-force per square millimeter. In the past, steels with tensile strength ratings this high have been problematic for automakers as they had low ductility and elongation properties.

What makes POSCO GIGA STEEL the ideal material for automakers is its ability to both bend and withstand an immense amount of weight and pressure. POSCO’s ultra high strength giga steel has up to three times more formability than other types of comparable steel on the market, making it ideal for manufacturers.

A car’s safety can also be enhanced significantly when POSCO GIGA STEEL is applied to a vehicle’s BIW (body in white) or front and back bumpers. POSCO GIGA STEEL is not only strong but has exceptional shock absorption during impact.

The strength and safety of POSCO GIGA STEEL have been tested and proven to meet the industry’s strictest safety standards. The POSCO Body Concept-Electric Vehicle (PBC-EV) is a lightweight and safe car body for electric vehicles made with POSCO GIGA STEEL. In safety tests, it received “five stars” from the Europe New Car Assessment Program and a “good” rating from the Insurance Institute for Highway Safety (IIHS) – the highest ratings one can receive from both organizations.

POSCO’s PBC-EV made with POSCO GIGA STEEL is both safe and lightweight.

POSCO GIGA STEEL Helps Deliver Lightweight & Sustainable Cars

Strict regulations on fuel efficiency and carbon emissions continue to push automakers to look for lighter materials to reduce the overall weight of vehicles. However, because stricter safety regulations typically require using heavier body parts, automakers are looking for both strong and light materials to build their cars. Lightweight solutions can be found in some alternative materials, such as aluminum and carbon fiber composites, but there are some drawbacks. For example, although POSCO GIGA STEEL is heavier than aluminum (when measuring equal parts area and thickness), it is more than three times stronger. Therefore, less of it is needed to manufacture products that are as light or lighter than those made with aluminum.

Car bodies manufactured with POSCO GIGA STEEL and other advanced high strength steels could see a 26% reduction in total weight when compared to cars of the same size with internal combustion engines. Considering that the average body weight of medium-sized cars in the early 2000’s was 280-300 kg, this is a remarkable achievement for automakers today.

Also, based on its life cycle assessment measuring carbon dioxide emissions from production to recycling, POSCO GIGA STEEL performs remarkably well as an eco-friendly material. According to the World Steel Association, steel emits 2.0 to 2.5 kg of carbon emissions when producing 1 kg of material while aluminum emits 11 to 12.6 kg when producing the same amount. Even after production, cumulative greenhouse gas emissions of vehicles made with steel is 10% lower when looking at the full life cycle.

POSCO GIGA STEEL Offers an Affordable Option

In automotive lightweighting, a reverse correlation often exists between price and weight. Lighter materials are typically more expensive and heavier materials usually have a lower price. POSCO GIGA STEEL helps bridge this gap by producing automotive steel that is both lightweight and cost-effective.  

Body parts made of POSCO GIGA STEEL can see significant cost savings. Alternative materials like aluminum can cost anywhere from 2.1 to 3.5 times more than POSCO GIGA STEEL. Additionally, current market prices of alternative materials are not expected to decrease over the next ten years.

Facing increasingly strict regulations, POSCO GIGA STEEL offers an ideal choice for automakers to build stronger, lighter, and more sustainable cars. According to POSCO Research Institute (POSRI), advanced high-strength steels (AHSS) like POSCO GIGA STEEL should see increased demand, accounting for 69% of total steel plates by 2023.

Throughout April & May, The Steel Wire will explore how POSCO is leading the automotive steel market with its innovative steel products like POSCO GIGA STEEL. Don’t miss any of the exciting stories from The Steel Wire – subscribe via email today.