The U.S. is headed towards a major shortage of truck drivers. (Source: The New York Times)

However, the U.S. is short of about 30,000 to 35,000 drivers for every 750,000 trucks, and the number of driver shortages may reach up to 245,000 by 2022. That’s because right now, the average age of truck drivers in the U.S. is 55, and potential new recruits are choosing to sign up for construction or manufacturing jobs instead.

All this leads to climbing prices for freight transportation. Last December, at the peak of holiday deliveries, U.S. companies saw the highest monthly average rate for freight transportation since 2010. The high operation costs and lower profit margins are putting a heavy strain on industries. Heading into 2018, companies have to compete for carriers as there is just one truck available for every 12 loads.

As a result, Major automakers are heavily invested in autonomous electric freight trucks such as Tesla, Volvo and Daimler, and there are many proponents of an eco-friendly, safe and driverless future for freight transportation. However, autonomous freight trucks are not a realistic option for companies just yet. At a time of transition between the old and the new, there is a serious lack of capacity in freight transportation, and companies are left to deal with the higher costs for delivery.  

But good news right around the corner

Although the driver shortage is a major concern, it is a natural phenomenon in the transition towards a safer, more sustainable and more efficient freight transportation industry.

Uber’s autonomous freight trucks are in operation with a human safety driver on the highways of Arizona. (Source: Future Car)

Already, Uber has its autonomous trucks on the highways of Arizona. Every truck does have a human driver present to take over anytime, and the company uses transfer hubs to transfer goods between highways and local roads. Autonomous trucks are the safest and most efficient for use on highways, so human drivers transport goods from highways to the final destination. The company is working to operate without human backup drivers in the near future.

Waymo’s autonomous freight trucks have gone through almost a decade of testing and is now delivering supplies for Google in Atlanta. (Source: Wired)

Waymo is another company with autonomous trucks already in operation. Just this month, the company’s autonomous freight trucks started transferring equipment for Google data centers in Atlanta.

Embark was the first company to complete a successful coast to coast run with an autonomous truck. (Source: Micro Power Grids)

Embark also has its autonomous trucks in operation. Earlier this year, the company made a successful 2,400-mile trip from California to Florida with a human safety driver on board. The company has plans to commercialize its services in the coming years.

SEE ALSO: 6 Cities On the Road to a Driverless Future

Speeding up delivery

Numerous other automotive and tech companies besides those mentioned above are getting ready for autonomous freight transportation. The faster autonomous freight trucks are able to operate commercially, the faster industries can cut costs, improve delivery times and reduce their carbon footprint.

This means software technology, high-capacity batteries as well as the right automotive materials will play a crucial role in the future of the freight transportation industry, as well as in related industries. This transformation will open up new business opportunities for automakers, software companies as well as steel manufacturers like POSCO.

For autonomous truck manufacturers looking for ultra-lightweight yet super strong materials for optimal fuel efficiency, POSCO developed POSCO GIGA STEEL. The advanced high-strength steel (AHSS) material is 3 times stronger and 3.5 times cheaper than aluminum. Steel is also 100 percent recyclable and an electric vehicle made of AHSS requires 30 percent less energy than aluminum throughout its entire lifecycle. POSCO also developed a premium non-oriented electrical steel called Hyper NO for the most advanced and sustainable electric motors.

SEE ALSO: Why Electrical Steel Can Make All The Difference In EV Motors

POSCO also works with its auto partners to research and provide customized technology and materials solutions for their autonomous EVs. In the midst of a critical shortage of truck drivers, POSCO hopes to speed up autonomous EV adoption both for personal and commercial transportation and aid the transition into a more efficient and environmentally sustainable economy.

Cover photo courtesy of Time.

The 2018 North American International Auto Show brought the biggest names in the auto industry together for a show and tell. (Source: News Atlas)

Continuing on what we saw during the past few years, the focus this year again was on improving safety, performance and design, all at the lightest weight possible for fuel economy. While there have been debates in the past about the best lightweight material, there was a clear winner at this year’s NAIAS. Almost every car, including the 2018 Car of the Year, was clad in advanced high-strength steel (AHHS) and significantly lighter than their predecessors.

Take a look at some of this year’s steel-clad cars.

SEE ALSO: 5 Reasons Why AHSS Tops the Market for Lightweight Auto Materials

2018 Car of the Year: Honda Accord

The 2018 Honda Accord took home the prestigious title of Car of the Year due to its lightweight and improved strength and performance. The 2018 model contains 29 percent ultra-high-strength steel (UHSS) in its chassis and 54.2 percent high strength steel (HSS). With these applications, the Honda Accord achieved a weight reduction of 110 to 176 pounds while improving its body torsional rigidity by 32 percent and its bending rigidity by 24 percent.

2019 Chevy Silverado

The all-new Chevy Silverado comes armed with plenty of steel. One of the features that contribute to its improved safety is the bed floor made of roll-formed HSS. Also, 80 percent of its fully-boxed steel frame is made of HSS and AHSS forms the Silverado’s safety cage. Overall, the new model is taller and 7 inches wider than before. Nevertheless, the all-new Silverado is 450 pounds lighter with a 10 percent increase in torsional rigidity than the previous model.

2019 Dodge Ram 1500

The 2019 Dodge Ram 1500 is another steel-intensive vehicle revealed at NAIAS. About 98 percent of this year’s model is made from HSS, and is the lightest, longest and most efficient frame in the half-ton truck segment. The wheelbase and crew cab is 4 inches longer than the previous model. The Dodge Ram 1500 also has several new safety features. The unique front-splayed frame rail technology, frame-mounted HSS tire blockers and fully-boxed side rails allow the car to absorb more energy in case of impact and minimize structural damage.

2019 Kia Forte

The 2019 Kia Forte is taller, wider and longer than before with 54 percent of its chassis made of AHSS. It also has a 16 percent stiffer body-in-white and the new seat frames are lighter yet stronger as Kia has its eyes on top ratings from the Insurance Institute for Highway Safety (IIHS) for the second consecutive year. The lighter and stronger vehicle will consume about 9 to 20 percent less fuel as well as drop noise levels by 5 decibels.

Why the Steel Overload?

As mentioned above, the latest cars are steel-intensive and automakers increasing the amount of HSS, UHSS and AHSS in their mix of materials. Of course, the main reason for this is steel’s innate properties that make it the ideal solution for automakers looking to cut back on weight and still satisfy safety standards. However, automakers also learned a good lesson from automakers who chose another popular lightweight material – aluminum.

SEE ALSO: Materials Matter: Why Steel Beats Aluminum in the Sustainability Debate

Back in 2014, Ford released its F-150 with an all-aluminum body. The move was bold and the cars sold fast as it was a whole 700 pounds lighter than previous models. Consumers got to drive away with a drastically improved fuel economy, but it didn’t take long for them to realize the big, expensive problem with aluminum bodies: repairs.

The 2015 Ford F-150 has an all-aluminum body. (Source: Hennessey Performance)

Although steel and aluminum are similar in terms of its lightweight properties, aluminum reacts differently than steel under heat. Aluminum does not have metal memory, while steel does, making it hard to reshape and repair following an accident. Welding aluminum also takes much more skill and precision than steel, and there are few repair shops that are equipped to handle aluminum. As a result, drivers not only have a hard time finding repair shops for their aluminum cars, they have to pay a hefty price for repairs compared to repairs for steel cars. For example, Jalopnik reported one of the first cases of the F-150 repairs back in 2015 cost USD 17,000 and a month-long repair time.

Of course, this was a rare case highlighting the steep learning curve of repairing aluminum vehicles, but it also highlights the fact that steel is still the norm when it comes to automotive materials, and judging from the 2018 NAIAS, it’s going to stay that way for quite some time.

Cover photo courtesy of Honda of Lincoln.

Scientists predict 2018 may be a tumultuous year for earthquakes. (Source: Take Two)

As structural damage is the leading cause of injury and deaths during an earthquake, architects, engineers and builders need to make sure buildings are built with the right materials and design.  

SEE ALSO: What it Takes to Build a Natural-Disaster-Proof House

The Materials

The most dangerous type of earthquakes are ones that trigger horizontal movements, because tall buildings are better at resisting vertical loads than horizontal ones. These ground motions can damage building foundations in a matter of minutes, causing severe injuries and deaths. Building a structure to withstand seismic waves starts with the right materials with the right properties, and steel is by far the most widely used material for building earthquake-resistant buildings.

According to the World Steel Association, ductile buildings are safer as they dissipate energy from seismic waves. A building will typically have ductile parts that can undergo plastic deformations without complete structural failure during an earthquake. Steel is the most common type of material for such parts.

Moreover, due to the law of inertia, the lighter the building, the less force seismic waves will exert on the building. That’s why it’s important, especially for taller buildings, to be made of light and flexible materials such as steel that can “bend” with the movement of earthquakes. On average, multi-story steel buildings are 60 to 70 percent lighter and 10 times stronger than concrete-framed buildings of the same size.

The Design

With steel, builders can add vital designs and reinforcements to keep the structure standing through an earthquake. Here’s some of the most widely-used measures.

Cross braces transfer the force of an earthquake to the ground. (Source: Earthquakes in India)

The structural integrity of buildings can be reinforced with steel cross braces that frame the exterior of a building in an x-shape. Ultimately cross braces can transfer the force of seismic waves back down to the ground, instead of letting the building take the hit. Builders can also reinforce the walls of buildings with additional vertical walls, or shear walls, that add stiffness to the frame of the building, allowing it to resist swaying or horizontal movements.

Base isolators absorb much of the shock of seismic waves. (Source: Embelton)

Base isolation involves separating the building from the foundation so that the isolators to absorb shock from the earthquake. The isolators allow the building to move at a slower pace because they dissolve a large part of the shock. Moment-resisting frames also effectively dissipate energy from floors and roofs to the building’s foundation and the stiff yet flexible frames can change shape during an earthquake. Although more costly, moment-resisting frames enable buildings to withstand an earthquake with excessive horizontal movement.

Putting it into practice with POSCO’s Steel House

In September 2017, Young Bae Kim’s home in Gyeongju province, Korea was hit with a 5.8 magnitude earthquake, just 8.9 km from where the earthquake started. Surprisingly, Kim’s home was unscathed. “I could feel the ground shake, but the house was completely under control.” Kim expressed.

Kim lives in one of the Steel Houses built by POSCO employees who volunteer to build homes and bridges for communities in need. Each Steel House is made with POSCO’s lightweight structural steel known for its durability, fire resistance and vibration resistance. The homes also incorporate PosMAC, a specialized galvanized steel that is 5 to 10 times more corrosion-resistant than standard steel and is more durable and affordable.

POSCO Employees volunteer their time to build steel houses in rural communities.

Because all the Steel Houses survived the Gyeongju earthquake while other homes were damaged, more and more people in Korea are choosing steel for their homes over traditional building materials such as wood and concrete. The same trend can be observed in Japan, where earthquakes are much more frequent. In order to build more earthquake-resistant buildings, steel is still the best solution available.

Cover photo courtesy of CNN.

Over the years, Game of Thrones has become more than just a show, but also a cultural movement, as fans have fallen in love with everything Game of Thrones related. As a result, HBO has partnered with numerous breweries to create special-edition beers, and the show’s jewelry designers even opened up their own online store. Another surprising consequence of the show’s popularity is the increasing number of people taking up an interest in blacksmithing to make replicas of their favorite swords and weapons from the show.

The Blacksmiths of Today

Although blacksmiths are rare to come by today, in the 18th and 19th centuries, they were a vital pillar of society. Blacksmiths hand-produced everything made of iron and steel, from pots and farming tools to swords and shields. They forged life’s necessities out of the hot metals, right up to the industrial revolution.

Traditionally, only young men were eligible to become blacksmiths once they completed a 7-year paid apprenticeship. Apprentices worked for established blacksmiths who would in turn house, feed and train them. Today, women can also become blacksmiths and there are various training and education programs available for aspiring blacksmiths.

Today, women are also eligible to become blacksmiths. (Source: Vietbao)

Modern blacksmiths do not hammer away to produce tools and weapons out of necessity, as machines are far more capable and efficient. Instead, they turn out beautiful pieces of art such as sculptures and unique knobs and bolts. And, the growing popularity of Game of Thrones has more young people pursuing the art as a hobby and a profession.

The Artist Blacksmiths Association of South Australia has reported a growing number of young adults who want to take up the art as a result of the show’s growing popularity. Most of the props in movies for war scenes and superheroes are crafted by hand, and fans want to replicate their favorite characters’ swords, shield and armor.

Blacksmithing for Dummies

So, for all you Game of Thrones lovers, or just plain ol’ steel junkies, here are the basics to get started in the craft. Get a piece of iron or steel, heat it, pound it into shape and cool it down. It sounds simple, but it takes a whole lot of sweat, patience and know-how to do it right.

Heating

Having a good source of heat is vital for blacksmiths, and most opt for a coke or propane forge (or oven). Steel is heated repeatedly to make a single object, so blacksmiths have a forge that is always hot and ready. Blacksmiths also commonly use an acetylene torch to apply heat to isolated areas to achieve specific designs.

A traditional coke forge. (Source: The Rookies)

Holding

An anvil looks like a big block of steel, and its the bedrock on which blacksmiths create their masterpieces. The quality of the anvil will affect not only the quality of the final product, but also the amount of physical labor required by the blacksmith. Tool steel is one of the best kinds of anvils available as it is extremely hard. Instead of absorbing energy from the blow of a hammer, it forces the energy back up the piece of metal being worked.

An anvil serves many different functions. (Source: The Consumer Dabbler)

Besides providing a flat surface, or face, for blacksmiths to pound away on, an anvil has many different features and functions. Blacksmiths also use the anvil to cut, shape and hold the piece of steel being worked along with tongs and clamps.

Hitting

The actual “work” entails a lot of hitting, but in a very calculated and practiced way. Blacksmiths use different types of hammers to pound the metal into various shapes. The 3 most basic techniques are drawing out, upsetting and peining. Drawing out a piece of hot steel means to make it longer by hammering the sides. Upsetting refers to adding force to one end of a hot piece of metal to add volume. Piening means to hammer the piece of steel to move it in a particular direction or to spread it out thin. Blacksmiths use tongs or other specialized tools to hold down the hot steel on the anvil while hammering and working the steel into shape.

Blacksmith hammers come in all different shapes, sizes and weights. (Source: Etsy Studio)

Quenching

After countless cycles of heating and hitting, the blacksmith will end up with the desired shape. The final step is to dip the work into a bucket of cold water to cool and harden the steel.   

Dipping the hot steel in cold water to cool and harden the steel is the final step. (Source: Horse Journals)

With the above basics, and all the accompanying safety gear, anyone can pick up the craft as a hobby to create unique pieces of steel art, or replicas of the greatest swords of Westeros.

Cover photo courtesy of Time Magazine.

However, these building projects are on another level of huge, and with all the megacities popping up throughout the country, China boasts many of the biggest infrastructure projects in the world. Here’s the Steel Wire’s look at some of the most impressive to date.

Three Gorges Dam

China is home to the largest dam in the world, measuring 1.5 miles in length and sitting 60 (!) stories tall. The Three Gorges Dam took 1.92 million tons of rolled steel to complete, along with 10.82 million tons of cement and 1.6 million cubic meters of timber. The dam opened in 2003 on the Yangtze River and last year, generated a record-high 97.8 billion kilowatt-hours of electricity, 4.35 percent higher than the previous year.

The Three Gorges Dam is the biggest dam in the world and is made up of 1.92 million tons of steel. (Source: Wikipedia)

Beijing Capital International Airport

Beijing Capital International Airport (PEK) was the second largest and busiest airport in the world in 2016, just behind the Hartsfield–Jackson Atlanta International Airport in the U.S. PEK recorded 94,393,454 passengers that flew in and out in 2016, a 5 percent increase from 2015, and is easily the biggest airport in all of Asia.

Beijing Capital International Airport is the biggest airport in Asia, and second in the world. (Source: Top China Travel)

The first phase of the airport cost USD 3.5 billion and was completed in 2008, but in order to handle the growing number of passengers, an expansion project is planned for 2025. The estimated 5-year project will almost double PEK’s capacity and cost an additional USD 13 billion.   

Jiaozhou Bay Bridge

China is also home to the longest sea-crossing bridge in the world. The massive structure stretches over 26.4 miles and connects the cities of Qingdao and Huangdao. The 110ft width accommodates 6 traffic lanes that are supported by 5200 steel pillars.

The Jiaozhou Bay Bridge is held up by 5200 steel pillars. (Source: Feel the Planet)

The bridge first opened in 2011 and took USD 2.3 billion and over 10,000 workers to build. The Jiaozhou Bay Bridge also took 450,000 tons of steel to complete, allowing the bridge to be able to withstand earthquakes up to 8.0 in magnitude, typhoons and the force from a 300,000-ton object.  

Jiuquan Wind Power Base

Not surprisingly, the largest wind farm in the world located in China. Jiuquan Wind Power Base is made up of 7,000 turbines that generate enough electricity to sustain a small country. The plant was approved in 2008, and the government has pledged an additional USD 17.4 billion by 2020 as part of the effort to develop China’s renewable energy industry. For now, only 3.3 percent of all the electricity generated in China comes from wind turbines. With the additional investment, Jiuquan Wind Power Base will be able to generate a massive 20 gigawatts of sustainable electricity.

The Jiuquan Wind Power Base generates enough energy to power a small nation. (Source: The New York Times)

New Century Global Center

What does the biggest building in the world look like? A mini country. Located in Chengdu, Sichuan province, the New Century Global Center combines a shopping mall, water park, hotels, movie theaters, offices, restaurants, ice rink and more into 19 million sq.ft. of space. The structure is made of glass and steel and measures 500 meters long, 400 meters wide and 100 meters high. Designed by architect Zaha Hadid, it even has artificial sun for the perfect weather, 24 hours a day.

The New Century Global Center located in Chengdu is the largest city in the world. (Source: Thousand Wonders)

Port of Shanghai

The world’s biggest ports are mostly located in China, and the biggest one is the Port of Shanghai. In 2012, 744 million tonnes of cargo and 32.5 million twenty-foot equivalent units (TEUs) of steel containers passed through the port. The entire area of the port on the Yangtze River covers 3,619km² comprised of 3 main ports: Wusongkou, Waigaoqiao and Yangshan Deep-Water Port. About 25 percent of China’s trade passes through the Port of Shanghai, or 2,000 steel container ships per month.

The Port of Shanghai is the largest port in the world and a quarter of China’s trade passes through it. (Source: Thomson Reuters)

Most recently, the 4th phase of the Yangshan Deep-Water Port was completed, making it the largest automated port in the world. It spans across 2.23 million square meters, and can automatically handle 4 million standard containers per year, or 25 per hour. It was also built to accommodate the heaviest ships in the world.

China is using its steel to build up the country’s infrastructure, and set world records along the way. Besides being impressive in size, the structures are expected to contribute to greater connectivity and economic prosperity throughout China.

Cover photo courtesy of Morgan Stanley.

CEO Kwon explores CES 2018

As such, CEO Kwon made his first official visit to the 2018 Consumer Electronics Show (CES) in Las Vegas earlier this month to stay on top of the latest trends in connectivity and smart solutions that can be applied to the manufacturing process in smart factories.

SEE ALSO: POSCO CEO Ohjoon Kwon Visits CES 2018

Ultimately, a smart factory for POSCO would entail using smart sensors to pick up data, smart analysis through AI and automated production processes. Moreover, the smart factory would store and analyze its big data and apply it to make future improvements and prevent malfunctions. Aligned with many of POSCO’s business growth engines, major topics and themes at CES 2018 included smart homes, smart cities, autonomous cars and AI, and more than 3,900 companies put forth their best innovations.

Smart Connectivity

As more and more cities undergo smart transformations, the next big trend will be data collection and analysis through 5G connectivity. It was no surprise to see numerous innovations in smart transportation, smart grid, public safety, healthcare, data analytics and more at CES 2018. Moreover, city officials from early-adapting cities such as Kansas City, Miami and Las Vegas took to the stage to discuss their cities’ smartization plans. Some of the topics discussed included using GIS mapping software, smart construction, inclusive technology and autonomous transportation to enhance citizens’ productivity, efficiency, safety and well-being.

CES 2018 was a platform for smart city discussion. (Source: Bosch)

CEO Kwon visited related booths to learn about new technologies POSCO could apply to its businesses. Currently, POSCO’s smart factories are run by POSCO ICT’s smart platform called PosFrame, which allows the factory to apply a digital genome map to operations via data collection, instantly convert smart factory initiatives in domains, act as a common platform for new technologies and apply the same, standardize smart factory model to other facilities through reusable software.

Also at this year’s CES, POSCO ICT signed an MOU with DPR Construction, a leading smart construction company to apply PosFrame to construction sites for more efficient, cost-effective and smarter construction processes.

Smart Transportation

Another major theme at this year’s CES was mobility. Namely, autonomous and electric mobility. Companies from all across the board from traditional car manufacturers and software companies to gaming companies lined up to showcase their new innovations.

Even as the market for sustainable EVs and autonomous EVs look to expand in 2018 and beyond, EVs only make up about 1 percent of the global fleet of cars and there’s still a ways to go before EVs become the norm. Drivers need to feel safe in their EVs or autonomous EVs, want greater range on a single charge and need to see more charging infrastructure in their communities before making the switch.

SEE ALSO: Ask an Expert: Electric Vehicles and the Future of the Automotive Market

What’s more is that just because a vehicle runs on electric batteries, it doesn’t automatically mean the vehicle is eco-friendly or transmits less harmful emissions. Manufacturers and consumers alike have to take a lifecycle approach to assess the car’s impact on the environment from production to end of life recycling.

POSCO works with numerous partners to develop leading solutions for electric vehicles.

That’s why POSCO is working with automakers to come up with vital solutions in the auto industry for a greener future. It supplies partners with an advanced high-strength steel (AHSS) called POSCO GIGA STEEL that is both lightweight and super strong, allowing cars to travel with less energy without compromising passenger safety.

POSCO is also a lithium provider and has developed an innovative technology to speed up the extraction process, saving time, costs and damage to the environment. It also works with car makers to apply premium electric steel to partners’ electric motors to increase efficiency and cut costs.

With so many exciting new innovations and technologies surrounding EVs, POSCO will undoubtedly play a significant role in ensuring automakers have the tools they need to realize a green future.  POSCO will work to stay ahead of newly emerging technologies to enhance the efficiency, sustainability and performance of all of its solutions.

For the International Broadcasting Center (IBC) completed last April, builders used POSCO’s Pos-H steel. Building parts were made by precisely cutting and welding the hot-rolled steel plates and thick plates. Pos-H is custom-made for structures and does not produce any waste unlike existing hot-rolled shape steel with fixed dimensions. In addition, POSCO’s dry fire-resistant cladding technique was applied to all the pillars of the IBC. The dry fire-resistant cladding technique eliminates the process of applying fire-resistant paint to pillars for fire prevention, and instead, fire-resistant materials are wrapped around the pillars.

The Media Residence that will house reporters during the PyeongChang Winter Olympics resembles a steel showroom due to its impressive design. PosMAC, which is over 5 times more corrosion-resistant than general galvanized steel sheets as it is coated with zinc, magnesium and aluminum, was specially printed to bring to life the fiber texture. PosMAC was used for the exterior of the bathrooms and walls for durability as well as artistic value. The surface steel plates plated with aluminum and zinc, called ALZASTA was treated to achieve a glittering spangle pattern texture and applied to the residence fire doors, valve enclosures and hallways. PossSD, stainless steel with a level of reflectivity equal to that of a mirror, was used inside the bathrooms.

The Media Residence was completed on December 15, after 8 months of construction. All of the 300 rooms were prefabricated in a factory and assembled at the site. This is known as modular construction. It reduced the construction period by 18 months compared to building with general concrete. More than anything else, modular construction makes it possible to move the structure to another location and reuse it. In this respect, modular construction is regarded as the best choice for the facilities that will be removed after the Winter Olympics. The Media Residence will be reused as a hotel or dormitory.

Finally, the Kwandong Hockey Center’s exterior walls are made of 329LD POSCO stainless steel, which is highly corrosion-resistant and robust. POSCO provided the structural analysis by calculating the optimal thickness for the walls and reduced the thickness by 25 percent.  

After the PyeongChang Winter Olympics and Paralympics, POSCO will continue to provide construction solutions through is WPP and technologies for its partners.  

Cover photo courtesy of Heerim.

With the performance increase in both steel and non-steel businesses in Korea and overseas, operating profit was highest it’s been in the last 6 years, and the operating profit to sales ratio was 7.6 percent. Year-on-year consolidated sales increased by 14.3 percent and operating profit and net profit increased by 62.5 percent and 183.7 percent respectively.

The total operating profit of POSCO’s non-steel businesses, which reached KRW 10 billion last year, also turned into a surplus. There was an overall increase in non-steel businesses including trade, energy, ICT, chemicals and materials, resulting in KRW 1.0927 trillion of profits, up KRW 1.0798 trillion from last year.

This is in line with POSCO CEO Ohjoon Kwon’s strategy to focus on group management by securing future growth engines and reforming non-steel businesses.

※ Total operating profit per sector

Indonesia-based integrated steel mill, PT. KRAKATAU POSCO, also generated a surplus for the first time since operations began in 2014. Mexico-based automotive steel sheet plant, POSCO Mexico, as well as India-based cold rolled steel corporation, POSCO Maharashtra, also achieved their highest operating profit, tripling the total operating profit of overseas steel business.

Moreover, separate sales and operating profit increased year-on-year by 17.4 percent and 10.1 percent respectively to KRW 28.5538 trillion and KRW 2.9025 trillion, and the net profit was KRW 2.5457 trillion.

Production and sales decreased year-on-year due to the repair and facility rationalization of Pohang Blast Furnace No. 3, but the sales ratio of World Premium products with better technology and higher returns increased to 53.4 percent, its higher ever.

Financial soundness was also saw improvements. POSCO’s Consolidated debt ratio decreased by 7.5%p year-on-year to 66.5 percent, the lowest since 2010. Separate debt ratio also decreased by 0.5%p year-on-year to 16.9 percent, constantly renewing the lowest record on a yearly basis.

POSCO also demonstrated a cumulative financial improvement of KRW 7 trillion with 150 cases of restructuring in the last 4 years, reinforcing the business structure as well as financial competency. Accordingly, this year the company expects to make more investments in new growth engines such as lithium and cathode materials as well as energy and construction in addition to renewing the facilities at its steel mills. Thus, there will be a budget of KRW 4.2 trillion for consolidated investment, an increase of KRW 1.6 trillion compared to last year. The consolidated sales target is KRW 61.9 trillion.

※ POSCO’s 2017 business performance

Since last February, CEO Kwon has visited Siemens, GE and other businesses in Silicon Valley to explore new technologies and expand POSCO Group’s smartization plan. At CES 2018, CEO Kwon saw first-hand the latest smart technologies and plans to implement them to all of POSCO’s core businesses including steel, construction, IT and energy. He also met officials from leading smart companies such as GE and DPR Construction, and examined possibilities for cooperation over commercializing POSCO’s smart solutions.

POSCO Kwon met Heilmann Matthias, President and CEO of Digital Solutions at Baker Hughes General Electric (BHGE). Matthias oversees the digital solution business of GE Group, and the two discussed the development of PosFrame, POSCO’s proprietary smart platform, its compatibility with Predix, GE’s smart platform, as well as the possibility for joint commercialization.

In particular, POSCO ICT is planning to sign an MOU with DPR Construction, the world leader in Smart Construction, to collaborate on smart projects and find opportunities to apply new ICT technologies to construction. Through this MOU, the two companies will cooperate on projects such as constructing and operating highly-efficient, low-cost data centers and smart factories controlled by PosFrame.

CEO Kwon also visited the automobiles, home appliances, smart city and smart home exhibition booths. He examined the latest tech trends of IT utilization in steel-consuming industries to develop compatible materials and steel solutions.

He also made sure to explore electric vehicle (EV) batteries and new IT technologies surrounding EVs, as lithium materials are the new growth engine of the company. CEO Kwon also evaluated the possibility of securing new markets for the group’s construction business at home and abroad.

POSCO Group plans to continue searching for new, innovative solutions to apply to its smartization efforts and actively develop domestic and overseas data centers and smart factory markets.

Cover photo courtesy of BGR.

The U-Shaped Relationship

However, the argument is not so black and white according to Spyridon Stavropoulos, Ronald Wall and Yuanze Xu’s Environmental regulations and industrial competitiveness: evidence from China. The study suggests that the relationship between stringent economic regulations and industrial (or economic) competitiveness is U-shaped. Meaning, initially, stringent regulations will increase the cost of production and make companies less profitable, but after a certain turning point, companies will be forced to adapt and innovate, thus becoming more competitive in the long run.

Many activists sit on both sides of the debate. (Source: Ethical Shopper)

When regulation policies are consistent over a long period of time, companies are forced to tackle the root of the problem, instead of focusing on meeting certain numbers. In today’s global economy, many governments have already begun to implement stringent economic regulations that only look to get tighter in the future. In such a context, companies that choose to innovate and come up with solutions to global pollution problems will come out more competitive in the end.

Sustainability Equals Competitiveness

Looking at major economic players around the world, it’s safe to say that environmental sustainability is a common topic on each of their respective national agendas. Pressing national challenges are tied to the environment in one way or another. For example, many countries are shifting their policies to ensure energy security. Countries that import most of their energy from external regions are subject to volatile prices and thus unstable economies. Thus, governments are actively supporting companies that can cultivate domestic, renewable energy sources. Another, more obvious, example is the direct link between pollution and health risks.

China is the fastest developing country in the world, and by 2035, it will be responsible for 28 percent of the total global energy demand. China also happens to be almost completely dependent on energy imports. Subsequently, the government has started a variety of government programs to boost sustainability as part of President Xi Jinping’s pledge to build a “Beautiful China”. These policies also come in the wake of shocking statistics: in 2015, pollution led to 1.8 million premature deaths in China.

Chinese President Xi Jinping laid out a 2-step plan to achieve a “Beautiful China.” (Source: News Gru)

Sustainable Steelmaker

Even with strong government commitment and plenty of programs to support sustainable business, most developing countries lack affordable renewable energy sources and the technology to apply those sources to existing production processes. Nevertheless, the world is changing and only those that adapt and innovate survive and thrive. That’s exactly what POSCO did starting back in 2007.

FINEX: A Game Changer

POSCO came up with a new molten iron production technology called FINEX. The technology allows molten iron and non-coking coal to be produced directly in a blast furnace during the iron-making process. It is different from the conventional blast furnace process, as it combines the coking plant, sinter plant and blast furnace into a single iron-making unit. This lowers production costs and reduces harmful emissions.

FINEX is a sustainable game-changer for steel production.

Ultimately, FINEX is one of the most cost-effective and eco-friendly ways to make steel. The technology mitigates the use of C02, has the lowest process-related emission rates and preserves resources through the use of a wide range of iron ores and non-coking coals. FINEX reduces SOx and NOx emissions by 40 and 15 percent respectively, and fine dust particles can be reduced by 34 percent compared to traditional blast furnaces. Furthermore, the by-products from the process generate highly valuable export gas that can be used for various purposes like electric power generation or natural gas substitution.

On December 7, 2017, POSCO reached 20 million cumulative tons of molten iron production using the FINEX technology. POSCO is not the only company enjoying the benefits of sustainable competitiveness – POSCO’s manufacturing partners can see lower emissions levels when evaluating the entire life cycle of their products.

SEE ALSO: POSCO Reaches 20 Million Tons of Production Using FINEX Technology

Sustainability is no longer just jargon. As environmental issues are intricately tied to the economy and even national security, governments around the world will be actively supporting sustainable companies in the years to come. Companies can expect sustainability and competitiveness to become interchangeable terms in the near future.